Wood paint brings aesthetic effects to products made of similar materials, but to get a beautiful, quality paint layer depends on many factors. In addition to choosing the right type of wood paint, it is also necessary to have professional techniques for using paint that are suitable for each different wood product characteristic.

Surface treatment is important for beautiful wood paint

Reasons to use wood paint

Painting wood is applying a thin layer of paint to the surface of a product made of wood that has been well treated. The effect of wood paint is to help wooden products always have a beautiful, shiny appearance, avoiding the product from being bent or warped because it effectively hides surface defects of painted wood products. bring.

It is necessary to paint the wood because this layer of paint also helps prolong the service life of wooden products over time.

Important notes to pay attention to when painting wooden furniture

When using wood paint, if you want to get the expected results, you need to pay attention to the following small details:

  • Before putting the paint mixture into the container to spray on the surface of the wood product, it must be stirred well to create uniformity and no lumps.
  • The paint mixing ratio must be consistent with the ratio instructed by the supplier.
  • Choose the right paint mixing formula for the right type of paint and solvent, otherwise it will affect the construction efficiency and quality of the paint layer.
  • Painting wood needs to be done according to the correct technical process to ensure effective construction.
  • The coating layer should only be applied when the primer layer is completely dry. Absolutely avoid applying the coating immediately after the primer layer has not yet dried.
  • Wherever you mix the paint, you should not store the dry paint mixture and use it within 6 hours of storage.

Painting wood needs to be done according to professional procedures

Sequence of steps in wood painting construction

Wood painting construction will bring the expected results if there is a standard technical wood painting process. The sequence of steps to apply wood paint is as follows:

  • Check the surface of the wood to see if it is smooth, shiny, if there are rough spots on the surface, if there are nails or screws attached, etc. If the surface does not meet the conditions for painting, it is necessary to Take the surface back to be treated and remember to pay attention to cleaning the wooden surface thoroughly.
  • Spray primer on the product surface 1 or 2 times depending on the characteristics of different wood products as well as the investor's requirements. The primer layer needs to be sprayed in a very thin, even layer while simultaneously spraying and removing dirt from the untreated wood surface.

Paint needs to be sprayed evenly for a thin, beautiful film

  • Mix the paint according to the instructions on the packaging and apply paint to the product surface. The coating layer needs to be sprayed thinly, covering the entire surface and at the same time, it needs to be sprayed evenly to avoid a situation where it is thick and thin.
  • Wait for the paint to dry for 1 to 48 hours depending on the type of paint chosen for application.

Choosing quality paint does not mean you will get an impressive paint film, it depends on the painting skills of the painter. With the above notes, you will definitely be able to exploit the value that the wood paint line will bring and at the same time not need to worry about the quality of use. Binh Thanh Acacia Chemical will be your companion for your wood products with top quality wood paint lines.

Glue Chemical Binh Thanh

Latest news